#4 - May 24 2018
Posted: Thu May 24, 2018 10:52 pm
- may 24 18 raw all.png (32.85 KiB) Viewed 7714 times
- may 24 18 pax all.png (55.36 KiB) Viewed 7714 times
- may 24 18 all.png (51.15 KiB) Viewed 7714 times
Okanagan Autocross
Hosted by the Okanagan Precision Driving Association
https://forum.okanaganautocross.net/
#4 - May 24 2018
Page 1 of 1
Re: #4 - May 24 2018
Posted: Thu May 24, 2018 10:53 pm
- may 24 18 tg results.png (10.54 KiB) Viewed 7713 times
- may 24 18 hs results.png (38.2 KiB) Viewed 7713 times
Re: #4 - May 24 2018
Posted: Fri May 25, 2018 7:06 pm
Still not dead last, and still dominating E/Mod.
I broke down and ordered heim joints for the rear. The poly bushings are reducing compliance making it harder to put power down, especially on this lot. Clearly I need to keep coming out more for further testing....
At least, if the wheels are spinning, the tranny's not slipping
I broke down and ordered heim joints for the rear. The poly bushings are reducing compliance making it harder to put power down, especially on this lot. Clearly I need to keep coming out more for further testing....
At least, if the wheels are spinning, the tranny's not slipping